Engine sealant is a Multi-purpose.
1. For best results, clean and dry all surfaces with a residue free
2. Cut nozzle to desired bead size-gaskets are best formed using a
1/16 and 1/14 bead.
3. Apply a continuous and even bead of silicone to one surface
surroud all bolt holes. Remove excess with knife at once. Allow
silicone to skin (15-20) minutes before assembling. Do not squeeze
out silicone by overtightening bolts. Re-torque will not be
4. Silicone dries in 1hour, and fully. Cures in 24 hours,
measuredat 70-50% relative humidity.